CREALITY Hi

Filament load & unload now gets even easier
with the CFS in play. Simply insert the filament
into the feeding tube, and then give
a few quick touches.

Creality Hi is 95% pre assembled. You can get it going in just 8 minutes after tightening only seven screws and some wiring. It's the most user-friendly bed slinger Creality has ever offered

Auto Bed Leveling &
X-axis Tilt Reduction

A good first layer is a nice print half done. Creality Hi,
with a comprehensive and precise auto-leveling system,
grants you the perfect first layer every time.

Dual Lead Screws

Two independently motorized lead screws adjust the X-axis to the horizontal position

High-sensitivity Sensor

A strain gauge in the toolhead auto-probes the bed for an accurate leveling mesh

A 100W AC heatbed that can reach 60℃ in 30s*
or 100 ℃ in 90s*, reducing the preparation time

100W Heatbed

Smooth Filament In/Out
by Touch Control

Filament load & unload now gets even easier with the CFS in play. Simply insert the filament into the feeding tube, and then give a few quick touches.

Assembly Gets Even Easier

Creality Hi is 95% pre assembled. You can get it going in just 8 minutes after tightening only seven screws and some wiring. It's the most user-friendly bed slinger Creality has ever offered

Camera with a Privacy Cap

· Video monitoring of your print jobs
· One tap to share time-lapse video
· Camera cap for privacy protection

Run-out Sensor in the Extruder

The usage of filament is now monitored more closely and precisely for run-out or breakage.
Filaments can be unloaded or switched (with CFS) with less residual waste.

Boosted by FOC Step-servo Motors

The X and Y axis of Creality Hi are driven by step-servo motors with FOC algorithms. Minimal step loss and layer shift. It enables quiet and smooth motion
even at a mind-blowing print speed

500 mm/s*

Max Speed

12000 mm/s²*

Max Acceleration

Printing Technology: Fused Deposition Modeling

Build Volume: 260 x 260 x 300 mm

3D Printer Dimensions: 409 x 392 x 477 mm

Printer Package Dimensions: 650 x 460 x 240 mm

Combo Package Dimensions: 650 x 460 x 560 mm

3D Printer Net Weight: 8.75kg

Combo Net Weight: 13.31 kg

3D Printer Gross Weight: 11.58kg

Combo Gross Weight: 19.14 kg

Printing Speed: 300 mm/s typical speed; 500 mm/s max speed

Acceleration: ≤ 12000 mm/s²

Printing Accuracy: 100+0.1 mm

Layer Height: 0.1-0.35 mm

Extruder: Direct drive extruder

Filament Diameter: 1.75 mm

Nozzle Type: Durable tri-metal nozzle

Nozzle Diameter: 0.4 mm, compatible with 0.6/0.8 mm

Nozzle Temperature: ≤ 300 °C

Heatbed Temperature: 100 °C

Build Plate: Two-sided epoxy flexible build plate

Leveling Mode: Full-auto leveling

XYZE Motor: Step-servo motor for X/Y axis; step motor for others

File Transfer: USB drive/WiFi

Display Screen: 3.2" color touch screen

Monitoring Camera: Yes

Filament Run-out Sensor: Yes

Auto Filament Relay: Yes (with CFS)

Filament Tangle Detection: Yes
Input Shaping (G-Sensor): Yes
Lighting Kit: Yes

Rated Voltage: AC 100~240V/ 50 Hz

Rated Power: 1150W@220V; 390W@110V

Supported Filaments: Hyper-PLA/PLA/PETG/ABS/PLA-CF

Slicing Software: Creality Print 5.1 and newer versions

Specifications

download brochure

Get in Touch

For product information, specifications, and images, please reach out to us through the form.